3 people

horsepower

Durable & Versatile

Welded Construction

3 people

horsepower

Durable & Versatile

Welded Construction

A Lightweight Sailboat Tender

The Seascape makes a great 2 person fishing boat, 3 person runabout, or 4 person ship to shore tender boat. The dropstitch air floor allows the boat to easily be rolled up for storage or transport for car trunks, RV storage lockers, and sailboat lockers. Capable of carrying everything from a trolling motor to a 10hp outboard, the boat has plenty of performance potential. It features an inflatable keel, dropstitch air floor, a 180° splash guard & grab rope, rub strakes, grab handles, Bimini attachment D-Rings, towing D-rings, and wear patches underneath the tubes.

The small and portable 9ft Seascape inflatable dinghy boat can be inflated and deflated in less than 10 minutes. The Seascape is perfect to use as a versatile tender boat, yacht tender, fishing boat, or small run about boat. The Seascape has extra large tubes (18 inches) that make it very stable and maneuverable at high speeds. The high-pressure air floor is the key feature of the 9ft Seascape and when fully inflatables creates a sturdy floor that keeps the boat light weight. This dinghy is the ideal small tender boat that can handle up to a 15" short shaft 10hp motor and up to 3 people. Recent updates also include additional D-Rings for Bimini attachments and other accessories!

The 9ft Seascape comes with a high-pressure drop stitch air floor that can handle up to 8 psi air pressure. This allows it to become extremely stiff once inflatable and feels just like a hard wood floor but easier to install and much lighter on the water. When deflated this inflatable boat is much more compact and takes up a lot less space to store. The Seascape 9ft model dinghy like all our inflatable boats is constructed with triple layered 1,100 denier PVC. One of the most durable materials on the market and a much more heavy-duty PVC than many other inflatable boats, the Seascape is virtually indestructible to rocks, sand, and other natural elements you encounter on the water. This lightweight inflatable boat can easily be carrier by one person and does not take up much space. This boat is great as a tender and It can be matched easily with any of Newport Vessels electric trolling motors.

WHY SHOULD YOU BUY A NEWPORT VESSELS INFLATABLE DINGHY BOAT?

The 9ft Seascape inflatable boat is the perfect small size dinghy. Its size makes it the perfect boat to be used as a tender or to cruise around a bay or lake. It handles great because of its 18-inch tubes that gives it a stable and smooth ride at high speeds. The high-pressure drop stitch air mat floor when inflated to the proper PSI becomes very rigid and firm. The air floor also provides a softer footing which is easy on the back. The 9ft Seascape is easy to inflate and deflate because of the air floor compared to the wood floor models. It also is easy to store when not in use because the air floor can simply be deflated and wrapped up like the boat itself.

Apart from the performance of the 9ft Seascape model inflatable boat the materials and construction used to create is boat is even more remarkable. At Newport Vessels we only use the highest quality imported PVC which make for longer lasting and durable boats. Many other PVC boat use Chinese PVC while the Seascape and all other Newport Vessels inflatables use Korean PVC material. The Korean PVC has UV protectants and flex additives that other cheaper made PVC does not have. To go along with our materials, our dinghies also use imported German adhesives that are specially made to avoid delamination, chemical corrosion damage, and adhesion breakdowns. Our inflatable boats only use the highest quality PVC materials and adhesives from top-notch suppliers to ensure we have great performance and long lasting boats.


NEWPORT VESSELS CARMEL DIMENSIONS (IN MM):
Hull:

1100 Denier Korean PVC (.9mm)

18" Diameter Tubes

Inflatable V-Keel

Sealed Marine Plywood Transom

High Pressure Air Floor (drop stitch fabric)

Equipment:

High-Pressure Dropstitch Air Floor

2 Piece Oars and Attachments

Aluminum Bench Seat

Foot pump

Boat Storage/Carrying Bag

DMV Registration Paperwork (Mailed Separately)

TECH SPECS

Material Korean PVC

Number of Air Chambers: 3 + Keel

Color: White & Blue

Inflatable Keel:Yes

Overall Length: 9"

Transom Construction: PVC Covered Marine Plywood

Inside Width: 24"

Floor Material: PVC Dropstitch Air Floor

Inside Length: 76"

Fabric Thickness: 1100D

Tube Diameter: 18"

Tube Pressure: 3.6 PSI

Load Capacity: 1,067 lbs

Carrying Bag: Yes

Max Engine Weight: 90 lbs

Two Oars: Yes

Max HP: 10 HP

Repair Kit: Yes

Outboard Shaft Length: Short (15"-17")

Foot Pump: Yes

Passengers: 3

Weight: 93 lbs

FEATURES:

Halkey-Roberts Valves

Bimini Top Attachment D-Rings

Self Bailing Drain Plug

Double Tear Drop Rub Strake

Grab Rope

Double layered PVC on bottom of tubes

Extra wear patch on tails for beaching

Hot Air Welding Construction

Number of Air Chambers: 3 + Keel

Inflatable Keel: Yes

Transom Construction: PVC Covered Marine Plywood

Floor Material: PVC Dropstitch Air Floor

Fabric Thickness: 1100D

Tube Pressure: 3.6 PSI

Carrying Bag: Yes

Two Oars: Yes

Repair Kit: Yes

Foot Pump: Yes

Weight: 93 lbs

Material: Korean PVC

Color: White & Bule

Overall Length: 9"

Inside Width: 24"

Inside Length: 76"

Tube Diameter: 18"

Load Capacity: 1065 lbs

Max Engine Weight: 90 lbs

Max Horsepower: 10 HP

Outboard Shaft Length: Short (15"-17")

Passengers: 3

How do I assemble my inflatable boat?

Assembly of your Newport Vessels inflatable boat will take about 15-20 minutes (especially the first time). Please view the detailed Owner's Manual for Wood Floor Inflatable Boat and Owner's Manual for Air Floor Inflatable Boat for the best most clear step by step directions. You can also view the brief assembly instruction video below of how to assemble your inflatable boat.

Hardwood floor

Air floor

Assembly of your Newport Vessels inflatable boat will take about 15-20 minutes (especially the first time). Please view the above video and the below steps to aid in the assembly and installation of the aluminum framed wooden floor boards. This part of the process will take about 5 minutes by using the following steps.

STEP A: Properly place Newport Vessels inflatable boat floor boards inside the boat in the correct order and attach the inflatable boat floor boards at the joint locations. Watch video above for proper technique & floorboard alignment instructions.

STEP B: Conjoin each individual floor together by inserting each floor boat (in the correct order) into the appropriate bracket. Once again, watch the above video for proper technique & inflatable boat floor board alignment instructions.

STEP C: Now that the inflatable boat floor board panels are properly and even placed within the boat (and the joints are properly connected) grab all the stringers and prepare for the aluminum stringer insertion. The longer side of the stinger is to be placed against the floor of the inflatable boat (leaving the more narrow/thin portion of the stringer facing upward. The motion to set the stingers in place is a rolling motion (not a sliding motion). The stingers are designed to roll into place and to secure snugly and not move. Watch video above for proper Newport Vessels inflatable boat stringer installation.

STEP D: Repeat the above steps for each individual aluminum stringer so that each joint of the wood panel floors are properly secured in place. The aluminum framed wood panel flooring provides an extremely rigid and secure flooring system for your boat. Wood flooring is recommended for multi passenger uses, dogs, standing, fishing, and all versatile inflatable boating applications. Watch the video above for proper technique & floor board alignment instructions.

Shipping Cost:

Shipping costs will be calculated at checkout for orders within the contiguous United States.

Orders outside of the contiguous United States, (Mexico and Canada) will be charged exact shipping costs

See our Shipping & Returns page for more information.

Inflatable Boat Warranty

Two Year Limited Warranty - (Warranty is non-transferable)

  1. We guarantee that each new inflatable boat and its accessories (hereinafter to be referred to as the “product”) is free from defects in material and workmanship.
  2. This warranty applies only to defects in material and workmanship, it does not apply to normal wear and tear, or to damage caused by:
    • Neglect, abuse, lack of maintenance, accident, abnormal or improper use, improper assembly, or failed repair attempts.
    • Use of an accessory or part neither manufactured nor sold by us.
    • Alteration or removal of parts.
    • Commercial use.
    • Improper protection against UV-light.
    • Extended exposure to the elements; sun, water, moisture, or humidity.
      • Newport Vessels inflatable products are manufactured with treated PVC materials. PVC material by nature (all brands & all models) will begin to breakdown, over-time, if left out in the elements. This warranty does not cover cases where products have been improperly protected against the elements for an extended duration. Please click here to view the difference between PVC and Hypalon.
  3. This warranty does not cover incidental or consequential costs or expenses such as haul-out, launching, towing transport and storage charges, telephone or rental charges of any type, inconvenience, waste of time or income losses, or other consequential damages.
  4. The customer must provide reasonable access to the product for warranty service by delivering the product for inspection to a dealer authorized to service the purchaser’s product. If a purchaser cannot deliver the product to such authorized dealer, the purchaser shall notify the company in writing. We shall then arrange for the inspection and repair, provided such service is covered under this warranty. The purchaser shall pay for all related transport expenses and/or any other expenses associated with that service. Any product or part shipped by the purchaser for inspection or repair must be shipped with transportation charges prepaid.Taking photographs and emailing them may suffice with Newport Vessels approval.
  5. Our obligation under this warranty shall be limited to repairing a defective part, or at our discretion, replacing such part or parts as shall be necessary to remedy the malfunction resulting from defects in material or workmanship as covered by this warranty. We reserve the right to improve the design of any product without assuming any obligation to modify any product previously manufactured. Each Purchase is entitled to one warranty claim submission and approval, once the claim is processed and approved, the Purchase is no longer eligible for future warranty claims.
  6. Boats purchased from unauthorized retailers are not covered by this warranty such as 3rd party Amazon resellers, eBay resellers, or other liquidator.
  7. Boats purchased as "Refurbished" or "Renewed" or "Used", are not subject to this warranty
Seascape
sketch
sketch
sketch
Customer Reviews
4.8 Based on 12 Reviews
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
KF
08/06/2021
karin f.
United States United States
PSI

Just inflated today. Foot pump does not have a gauge - how am I supposed to k ow when I reach recommended PSI???

HO
05/25/2021
Harry O.
United States United States
Seascape Purchase

I’m 100% satisfied the folks at Newport Vessels were extremely helpful . My Seascape arrived intact the instructions were easy to follow. I had my boat inflated in less than 10 minutes. Thank You Newport Vessels for an outstanding product

JP
05/03/2021
Jorge P.
United States United States
Haven’t splash it yet

So far so good! Just inflated today! I noticed a couple of small places where it has a glue missing. But it seems pretty good overall.

Newport Vessels Seascape Review
DV
04/26/2021
Dave V.
United States United States
Fantastic tender for our Cruiser!

This is our second Seascape inflatable since our first one was stolen from our boat after only 2 weeks of use! I have been looking hard to find a great dinghy that could hold 3 people for launching off our Express Cruiser and this model is far higher quality and nicer aesthetics than the West marine brand or any of the other inflatable's out there at a far lower price than the Marine stores out there. You can’t go wrong with this model for the price and performance as well as good looks!

Newport Vessels Seascape ReviewNewport Vessels Seascape Review
DK
09/02/2019
Daniel K.
United States United States
Little Dulci

Rewarding! Rowed her the first time out. Looking forward to running her with the 55lb thrust motor. In the meantime, please refer to photo. A bit under inflated and not sure about the seat placement. This is a very well constructed boat. Has a sturdy feel. Thanks Newport team!